how to write a static route between two Vlans

sibrahimoff — Mon, 11 Mar 2019 21:44:38 GMT

Here is what i need.

Servers at Vlan 6 must see servers at Vlan 2, 10, 11, 12. and and vica versa

How to write the correct commands.

Here is my outputs:

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4

2 ****OFFICE_SERVERS**** active Fa1/0/13, Fa1/0/14, Fa1/0/15, Fa1/0/16, Fa1/0/17, Fa1/0/18, Fa1/0/19, Fa1/0/20, Fa1/0/25

Fa1/0/26, Fa1/0/29, Fa1/0/30, Fa1/0/33, Fa1/0/34

4 ****END_USER**** active Fa1/0/39

6 ****ILO**** active Fa1/0/1, Fa1/0/2, Fa1/0/3, Fa1/0/4, Fa1/0/5, Fa1/0/6, Fa1/0/7, Fa1/0/8, Fa1/0/9, Fa1/0/10

10 ****WEB**** active Fa1/0/27, Fa1/0/28, Fa1/0/31, Fa1/0/32, Fa1/0/43

11 ****APP_SERVERS**** active Fa1/0/11, Fa1/0/12, Fa1/0/21, Fa1/0/22, Fa1/0/35, Fa1/0/36

12 ****DB_SERVERS**** active Fa1/0/23, Fa1/0/24, Fa1/0/37

99 ****VISITORS**** active

Gateway of last resort is 192.168.0.253 to network 0.0.0.0

C 192.168.10.0/24 is directly connected, Vlan100

172.16.0.0/24 is subnetted, 6 subnets

C 172.16.29.0 is directly connected, Vlan99

C 172.16.30.0 is directly connected, Vlan6

C 172.16.9.0 is directly connected, Vlan3

C 172.16.10.0 is directly connected, Vlan4

C 172.16.0.0 is directly connected, Vlan1

C 172.16.1.0 is directly connected, Vlan2

C 192.168.0.0/24 is directly connected, Vlan5

S* 0.0.0.0/0 [1/0] via 192.168.0.253

how to write a static route between two Vlans

mvsheik123 — Mon, 31 Oct 2011 19:12:50 GMT

Hello,

It appears to be switch configuration. If you create Vlan interface on this switch, as these are drectly connected subnets, they should able to communicate.

hth

topic how to write a static route between two Vlans in Network Security

how to write a static route between two Vlans

how to write a static route between two Vlans