ASA context mode

mj11 — Mon, 11 Mar 2019 21:44:22 GMT

Hi All

I am trying to change the ASDM listening port number within a context but getting the following error:

DMZwebcon(config)#http server enable 444

ERROR: % Invalid Hostname

Is this commad only available in the admin/system context or a software issue???

Any help welcome

Regards MJ

ASA context mode

Maykol Rojas — Mon, 31 Oct 2011 22:21:30 GMT

Hi MJ,

Please refer to

http server enable

To enable the adaptive security appliance HTTP server, use the http server enable command in global configuration mode. To disable the HTTP server, use the no form of this command.

http server enable [port]

Syntax Descriptionno http server enable [port]


port	The port to use for HTTP connections. The range is 1-65535. The default port is 443.

Defaults

The HTTP server is disabled.

Command Modes

The following table shows the modes in which you can enter the command:


Command Mode	Firewall Mode		Security Context
	Routed	Transparent	Single	Multiple
	Routed	Transparent	Single	Context	System
Global configuration	•	—	•	—	—

Located at

http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/gh.html#wp1781150

Basically, since the VPN functionality is lost when you pass to multiple context, there is no real need to change the default SSL port on the ASA, hence the command is not supported on that specific mode.

Let me know if you have any further questions.

Mike

topic ASA context mode in Network Security

ASA context mode

ASA context mode

http server enable

Syntax Descriptionno http server enable [port]

Defaults

Command Modes