topic CSC unresponsive in Network Security https://community.cisco.com/t5/network-security/csc-unresponsive/m-p/1769091#M494474 <HTML><HEAD></HEAD><BODY><P> Check whether the CSC module is showing on the ASA bootup or type 'Show module' on ASA.</P><P></P><P>If its not showing then the module is not plugged correctly.</P></BODY></HTML> Mon, 31 Oct 2011 09:09:57 GMT Alexander Moorthy 2011-10-31T09:09:57Z CSC unresponsive https://community.cisco.com/t5/network-security/csc-unresponsive/m-p/1769090#M494471 <P>Dear All,</P><P></P><P>I found my CSC module installed in ASA 5510 unresponsive. I tried to recover / re-image the module with .bin file. but I think it is not possible to re-image because there is no rechability with CSC module, and session 1 command also doesn't work,</P><P></P><P>you can see the response here.</P><P></P><P></P><P>CS-ASA# session 1</P><P>Opening command session with slot 1.</P><P>Card in slot 1 did not respond to session request.</P><P>CS-ASA#</P><P></P><P>In this case how to enter into the module?</P><P></P><P>I removed and inserted the module and tried to reach to it .. but couldnt solve . I just wanted to know whether hardware is dead or not. Please confirm.</P><P></P><P>Thanks</P><P>Hari</P> Tue, 26 Mar 2019 00:47:23 GMT https://community.cisco.com/t5/network-security/csc-unresponsive/m-p/1769090#M494471 harisapkota123 2019-03-26T00:47:23Z CSC unresponsive https://community.cisco.com/t5/network-security/csc-unresponsive/m-p/1769091#M494474 <HTML><HEAD></HEAD><BODY><P> Check whether the CSC module is showing on the ASA bootup or type 'Show module' on ASA.</P><P></P><P>If its not showing then the module is not plugged correctly.</P></BODY></HTML> Mon, 31 Oct 2011 09:09:57 GMT https://community.cisco.com/t5/network-security/csc-unresponsive/m-p/1769091#M494474 Alexander Moorthy 2011-10-31T09:09:57Z