topic Re: pix 525 in Network Security

pix 525

shadaabahmed — Fri, 21 Feb 2020 09:47:08 GMT

dear guys help in pix 525 configuration

i have pix525 with active /standby license what i have to do

and right now i cant ping from my inside of pixfirewall to dmzzone

i cant understand

i appliend nat ,global,acces-list still its not pinging

my secanrion is internet router -pix525-inside and my dmz sever

right now we are having 14 server in dmz

each server is having 2 lan cards

one lan card is going to dmz and other lan card is going to inside directly without pix

ie from outside its dmz

but from inside its inside

and we are having isa server in dmz zone

does that is stooping ping from inside to dmz

plz

solve any body

i can give the running config and secnario

Re: pix 525

ebreniz — Fri, 16 Nov 2007 18:20:05 GMT

Try and ping from the inside to outside and to the dmz's. You should do a "clear xlate" command after every change you make.(very important).Refer to the PIX Firewall documentation at the following site:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/index.htm

Re: pix 525

rajeshiyer — Wed, 28 Nov 2007 14:17:06 GMT

Hi shadaabahmed

Could you provide the running config ?

Moreover, when you said "other lan card is going to inside directly without pix " , you mean to say few inside host has direct access to the DMZ server ? Is this the way ?

Thanks

Rajesh Hariharan