https://community.cisco.com/t5/network-security/difference-between-these-two-nat-types/m-p/3999060#M4949 <P>Dear community,</P><P>I have implemented two nat types and am able to achieve the same result. The nat types are static and port forward nat as below:&nbsp;</P><P><STRONG>nats</STRONG></P><P>nat (inside,outside) source static R1 ASA102</P><P>nat (inside,outside) source static static R1 ASA102&nbsp; service telnet telnet</P><P>&nbsp;</P><P><STRONG>objects</STRONG></P><P>ASA(config)# sh run object<BR />object service tel<BR />service tcp source eq telnet<BR />object network R1<BR />host 192.168.1.2<BR />object network ASA102<BR />host 101.1.1.102</P><P>&nbsp;</P><P>I am able to telnet to R1 through ASA102 using both nats, so whats the difference here?</P><P>&nbsp;</P><P>Regards,</P><P>Isaac</P><P>&nbsp;</P><P>&nbsp;</P> Fri, 21 Feb 2020 17:45:59 GMT isaaco001 2020-02-21T17:45:59Z https://community.cisco.com/t5/network-security/difference-between-these-two-nat-types/m-p/3999060#M4949 <P>Dear community,</P><P>I have implemented two nat types and am able to achieve the same result. The nat types are static and port forward nat as below:&nbsp;</P><P><STRONG>nats</STRONG></P><P>nat (inside,outside) source static R1 ASA102</P><P>nat (inside,outside) source static static R1 ASA102&nbsp; service telnet telnet</P><P>&nbsp;</P><P><STRONG>objects</STRONG></P><P>ASA(config)# sh run object<BR />object service tel<BR />service tcp source eq telnet<BR />object network R1<BR />host 192.168.1.2<BR />object network ASA102<BR />host 101.1.1.102</P><P>&nbsp;</P><P>I am able to telnet to R1 through ASA102 using both nats, so whats the difference here?</P><P>&nbsp;</P><P>Regards,</P><P>Isaac</P><P>&nbsp;</P><P>&nbsp;</P> Fri, 21 Feb 2020 17:45:59 GMT https://community.cisco.com/t5/network-security/difference-between-these-two-nat-types/m-p/3999060#M4949 isaaco001 2020-02-21T17:45:59Z https://community.cisco.com/t5/network-security/difference-between-these-two-nat-types/m-p/3999065#M4952 <P>you do not see any difference in terms of operation, But the order process will be changed. look at the below document :</P> <P>&nbsp;</P> <P><A href="https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/116388-technote-nat-00.html#anc5" target="_blank">https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/116388-technote-nat-00.html#anc5</A></P> Sun, 15 Dec 2019 12:46:14 GMT https://community.cisco.com/t5/network-security/difference-between-these-two-nat-types/m-p/3999065#M4952 balaji.bandi 2019-12-15T12:46:14Z