Debug command stops after exiting

michael.heer — Mon, 11 Mar 2019 21:40:21 GMT

Hi,

We are experiencing intermittent issues with the IPS on our ASA5585 vs 8.4(2). Probably something with the dataplane. So I want to keep debug cplane 255 activated and logged with log debug-trace setting to syslog server.

But when session times out the debug command is cleared so the output stops. Since it is a intermittent issue I want to keep debug activated...Totally different behaviour then with routers which keeps it activated.

Somebody an idea how to keep debug activated on a ASA.

Regards,

Mike

Debug command stops after exiting

varrao — Thu, 20 Oct 2011 09:46:03 GMT

Hi Mike,

You might very well be running into this:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCse30168

I would suggest you follow the workaround in the enhancement request above, so taht it doesnt hinder your troubleshooting.

Let me know if you have any other questions.

Thanks,

Varun

topic Debug command stops after exiting in Network Security

Debug command stops after exiting

Debug command stops after exiting