topic Re: PIX as a router in Network Security https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778205#M495303 <HTML><HEAD></HEAD><BODY><P>It has 6 interfaces. I still dont know the version of the Pix 515E however im sure it is 7.x coz it was bought last year 2006. </P><P></P><P>By the way each subnet contains 100+ users.</P></BODY></HTML> Wed, 15 Aug 2007 06:10:35 GMT Rejohn Cuares 2007-08-15T06:10:35Z PIX as a router https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778203#M495300 <P>Hello Guys need your guidance!</P><P></P><P>Is it possible to use the PIX 515E as a router? See the link below for the network topology.</P><P></P><P><A class="jive-link-custom" href="http://img259.imageshack.us/img259/2831/pixasarouterns1.jpg" target="_blank">http://img259.imageshack.us/img259/2831/pixasarouterns1.jpg</A></P><P></P><P>Referring to the network topology. The client want that the two subnets (192.168.1.0/24 and 192.168.2.0/24) can access each other. In addition, both subnets be able to access the web. </P><P></P><P></P><P></P><P> </P> Fri, 21 Feb 2020 09:38:32 GMT https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778203#M495300 Rejohn Cuares 2020-02-21T09:38:32Z Re: PIX as a router https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778204#M495302 <HTML><HEAD></HEAD><BODY><P>Hi </P><P></P><P>Yes you can do this. Presumably you have 3 interfaces on the pix firewall ? </P><P></P><P>How you set this up depends on what version of code you are running on your pix ie. v6.x or v7.x. </P><P></P><P>Which version are you running on your pix ?</P><P></P><P>Jon</P></BODY></HTML> Tue, 14 Aug 2007 23:58:17 GMT https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778204#M495302 Jon Marshall 2007-08-14T23:58:17Z Re: PIX as a router https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778205#M495303 <HTML><HEAD></HEAD><BODY><P>It has 6 interfaces. I still dont know the version of the Pix 515E however im sure it is 7.x coz it was bought last year 2006. </P><P></P><P>By the way each subnet contains 100+ users.</P></BODY></HTML> Wed, 15 Aug 2007 06:10:35 GMT https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778205#M495303 Rejohn Cuares 2007-08-15T06:10:35Z Re: PIX as a router https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778206#M495304 <HTML><HEAD></HEAD><BODY><P>It would be a lot easier if it is version 7.x</P><P></P><P>What you can do is make the 2 interfaces that connect to your internal subnets the same security level. Then add the following command to your config </P><P></P><P>same-security-traffic permit inter-interface</P><P></P><P>This will allow traffic to flow freely between those 2 subnets without access-lists or NAT statements.</P><P></P><P>HTH</P><P></P><P>Jon</P></BODY></HTML> Wed, 15 Aug 2007 06:29:10 GMT https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778206#M495304 Jon Marshall 2007-08-15T06:29:10Z Re: PIX as a router https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778207#M495305 <HTML><HEAD></HEAD><BODY><P>thank you very much for your replies Jon!</P><P></P></BODY></HTML> Tue, 28 Aug 2007 04:31:53 GMT https://community.cisco.com/t5/network-security/pix-as-a-router/m-p/778207#M495305 Rejohn Cuares 2007-08-28T04:31:53Z