topic Re: Cisco PIX Firewall Version 6.3(4) - IP deny!!! in Network Security

Cisco PIX Firewall Version 6.3(4) - IP deny!!!

orlandoegb — Mon, 11 Mar 2019 21:37:01 GMT

I would like to know how can I block a ip address from the CLI at the Cisco PIX Firewall Version 6.3(4)

zulqurnain — Wed, 12 Oct 2011 20:12:15 GMT

Hi,

If you are talking about blocking IP for remote management to PIX or you want to block an IP address as traffic

For option two

access-list in-out deny ip source address destination address

Then apply the access-list to inside interface

Access-group in-out in interface inside

Sent from Cisco Technical Support iPad App

orlandoegb — Wed, 12 Oct 2011 20:18:10 GMT

Hi Zulqurnain,

Thanks but I want to block the ip from Internet as traffic...and i would like to apply the acl to outside interface...

Regards

Orlando

varrao — Thu, 13 Oct 2011 00:58:15 GMT

Hi Orlando,

If you want to block ip's on the internet to access any network on the inside then you can apply the following:

access-list out_in extended permit ip host 1.1.1.1 any

access-group out_in in interface outisde

Hope that helps

Varun

orlandoegb — Thu, 13 Oct 2011 01:32:27 GMT

Hi Varun

Thanks for your assistance...

Regards

Orlando

Sent from Cisco Technical Support iPhone App