topic ASA - [ Scanning] drop rate-2 exceeded in Network Security https://community.cisco.com/t5/network-security/asa-scanning-drop-rate-2-exceeded/m-p/1738450#M496314 <HTML><HEAD></HEAD><BODY><P>Hi mike, </P><P></P><P>thanks for reply. </P><P></P><P>can i say this is a reconnaisance on the other peer end scanning on my network? </P><P></P><P>this detection is detect by ASA or the AIP-SSM? </P><P></P><P>what action can i do to stop this?</P><P></P><P>thanks</P><P></P><P>Noel</P><BR /></BODY></HTML> Fri, 07 Oct 2011 05:08:56 GMT yong khang NG 2011-10-07T05:08:56Z ASA - [ Scanning] drop rate-2 exceeded https://community.cisco.com/t5/network-security/asa-scanning-drop-rate-2-exceeded/m-p/1738448#M496310 <P>Hi Forumers'</P><P></P><P>is anyone can explain what this log message mean?</P><P></P><P>[ Scanning] drop rate-2 exceeded. Current burst rate is 1 per second, max configured rate is 8; Current average rate is 16 per second, max configured rate is 4; Cumulative total count is 58000</P><P></P><P>thanks</P><P></P><P></P><P></P><P>Noel</P> Mon, 11 Mar 2019 21:35:05 GMT https://community.cisco.com/t5/network-security/asa-scanning-drop-rate-2-exceeded/m-p/1738448#M496310 yong khang NG 2019-03-11T21:35:05Z ASA - [ Scanning] drop rate-2 exceeded https://community.cisco.com/t5/network-security/asa-scanning-drop-rate-2-exceeded/m-p/1738449#M496312 <HTML><HEAD></HEAD><BODY><P>Noel, </P><P></P><P>That log is triggered when a threat detection is triggered. You will need to analyze your threat detection values to see if it is normal. </P><P></P><P>Check the following </P><P></P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/docs/security/asa/asa82/system/message/logmsgs.html#wp4963969">http://www.cisco.com/en/US/docs/security/asa/asa82/system/message/logmsgs.html#wp4963969</A></P><P></P><P>Mike</P></BODY></HTML> Fri, 07 Oct 2011 03:45:41 GMT https://community.cisco.com/t5/network-security/asa-scanning-drop-rate-2-exceeded/m-p/1738449#M496312 Maykol Rojas 2011-10-07T03:45:41Z ASA - [ Scanning] drop rate-2 exceeded https://community.cisco.com/t5/network-security/asa-scanning-drop-rate-2-exceeded/m-p/1738450#M496314 <HTML><HEAD></HEAD><BODY><P>Hi mike, </P><P></P><P>thanks for reply. </P><P></P><P>can i say this is a reconnaisance on the other peer end scanning on my network? </P><P></P><P>this detection is detect by ASA or the AIP-SSM? </P><P></P><P>what action can i do to stop this?</P><P></P><P>thanks</P><P></P><P>Noel</P><BR /></BODY></HTML> Fri, 07 Oct 2011 05:08:56 GMT https://community.cisco.com/t5/network-security/asa-scanning-drop-rate-2-exceeded/m-p/1738450#M496314 yong khang NG 2011-10-07T05:08:56Z