topic Re: PIX VLAN Configuration in Network Security https://community.cisco.com/t5/network-security/pix-vlan-configuration/m-p/642053#M497010 <HTML><HEAD></HEAD><BODY><P>Since the interface will go from an access port to a trunk, there will be an outage. You will have to move the config from a physical interface to the new logical one. </P><P></P></BODY></HTML> Mon, 23 Oct 2006 17:02:21 GMT Collin Clark 2006-10-23T17:02:21Z PIX VLAN Configuration https://community.cisco.com/t5/network-security/pix-vlan-configuration/m-p/642052#M497006 <P>Hi All,</P><P></P><P>I have at work a Pix 515E utilizing s/w 6.3(4) - all 6 physical interfaces are in use.</P><P></P><P>I need to use the vlan support that the pix provides. What I want to know is whether I will lose any of the pix current config associated with the interface that I want to use for vlanning.</P><P></P><P>If the answer is yes, then is there a work around as to not lose the configuration ...</P><P></P><P></P><P>Regards</P><P>Lincoln</P><P></P> Fri, 21 Feb 2020 09:15:31 GMT https://community.cisco.com/t5/network-security/pix-vlan-configuration/m-p/642052#M497006 lincolnp1 2020-02-21T09:15:31Z Re: PIX VLAN Configuration https://community.cisco.com/t5/network-security/pix-vlan-configuration/m-p/642053#M497010 <HTML><HEAD></HEAD><BODY><P>Since the interface will go from an access port to a trunk, there will be an outage. You will have to move the config from a physical interface to the new logical one. </P><P></P></BODY></HTML> Mon, 23 Oct 2006 17:02:21 GMT https://community.cisco.com/t5/network-security/pix-vlan-configuration/m-p/642053#M497010 Collin Clark 2006-10-23T17:02:21Z