topic Re: Lab-to-Lan EasyVPN between PIX and Concentrator 3000 in Network Security

Lab-to-Lan EasyVPN between PIX and Concentrator 3000

colomacrespi — Fri, 21 Feb 2020 09:13:10 GMT

Hi to all,

I?m trying to set an EasyVPN connection between a PIX Firewall and a Concentrator 3000.

Some details about the configuration:

-I?m using client extension mode for the EasyVPN connection.

-PIX private interface network is: 10.0.10.0/24

-PIX public interface uses DHCP.

-The user created on the Concentrator to get the connection from the EasyVPN Client is PIXPlug&Play.

I manage to establish the tunnel. I also manage to trasmit traffic from the PIX to the concentrator. But I never get a response.

I have check routes after the concentrator in our LAN for the network 10.0.10.0, and they are ok (10.0.10.0 255.255.255.0 172.19.128.206(concentrator private IP)).

I attach the PIX and Concentrator?s configurations and logs.

I'm hopeless about this problem... Any idea will be wellcome...

Thanks in advance,

Coloma Crespi

Re: Lab-to-Lan EasyVPN between PIX and Concentrator 3000

ivillegas — Wed, 11 Oct 2006 12:34:09 GMT

Check these link

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00801dd672.shtml

http://www.cisco.com/en/US/tech/tk583/tk372/tech_configuration_examples_list.html

Re: Lab-to-Lan EasyVPN between PIX and Concentrator 3000

colomacrespi — Mon, 16 Oct 2006 08:48:27 GMT

Thanks for the information mate!

But I?d already checked this before posting this message...

Any ideas about why the tunnel establishes but does not pass traffic accross it?????