topic Re: PIX HTTPS timeout in Network Security https://community.cisco.com/t5/network-security/pix-https-timeout/m-p/622395#M497262 <HTML><HEAD></HEAD><BODY><P>Thanks, I wasn't sure if conn meant all connections or if there was a specific command for an HTTPS or port 443 connection.</P></BODY></HTML> Thu, 28 Sep 2006 14:47:54 GMT jjames 2006-09-28T14:47:54Z PIX HTTPS timeout https://community.cisco.com/t5/network-security/pix-https-timeout/m-p/622393#M497255 <P>Setting up a Microsoft Mobile device to sync over the Internet using Exchange ActiveSync, Microsoft suggests setting the HTTPS connection timeout to a value of 30 minutes. Setting this value will give the device longer battery life. How do I set the HTTPS timeout in the PIX firewall with version 6.3?</P> Fri, 21 Feb 2020 09:12:02 GMT https://community.cisco.com/t5/network-security/pix-https-timeout/m-p/622393#M497255 jjames 2020-02-21T09:12:02Z Re: PIX HTTPS timeout https://community.cisco.com/t5/network-security/pix-https-timeout/m-p/622394#M497259 <HTML><HEAD></HEAD><BODY><P>the default set on the pix is 1hr, but i believe the command you are looking for is:</P><P></P><P>timeout conn command</P><P></P><P>example for a show timeout: </P><P></P><P>show timeout</P><P></P><P>timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 </P><P>sip 0:30:00 sip_media 0:02:00</P><P></P><P></P></BODY></HTML> Thu, 28 Sep 2006 13:20:14 GMT https://community.cisco.com/t5/network-security/pix-https-timeout/m-p/622394#M497259 obynz 2006-09-28T13:20:14Z Re: PIX HTTPS timeout https://community.cisco.com/t5/network-security/pix-https-timeout/m-p/622395#M497262 <HTML><HEAD></HEAD><BODY><P>Thanks, I wasn't sure if conn meant all connections or if there was a specific command for an HTTPS or port 443 connection.</P></BODY></HTML> Thu, 28 Sep 2006 14:47:54 GMT https://community.cisco.com/t5/network-security/pix-https-timeout/m-p/622395#M497262 jjames 2006-09-28T14:47:54Z