topic Newbie pix 525 problem in Network Security https://community.cisco.com/t5/network-security/newbie-pix-525-problem/m-p/694490#M497387 <P>hi all</P><P>i have pix 525 version 6.2(2)</P><P>previously its acts as standby,and license as failover unit only</P><P></P><P>i already write erase all the config and reboot.i wanna test connection , so i connect directly to my notebook.</P><P>the prob is i seems cannot ping my notebook.</P><P>configured same network and still cant ping to notebook , and vice versa</P><P></P><P>in the pix, ip address configured</P><P>permit icmp in+out configured</P><P>conduit permit icmp done</P><P>even tried applying ACL</P><P>but still to no avail</P><P></P><P>plus, i keep on receiveing this warning msg"configuration replication not supported .....config no longer synchro"</P><P></P><P>is there still any config inside, which cause basic connection to fail?</P> Fri, 21 Feb 2020 09:11:26 GMT asanparjo 2020-02-21T09:11:26Z Newbie pix 525 problem https://community.cisco.com/t5/network-security/newbie-pix-525-problem/m-p/694490#M497387 <P>hi all</P><P>i have pix 525 version 6.2(2)</P><P>previously its acts as standby,and license as failover unit only</P><P></P><P>i already write erase all the config and reboot.i wanna test connection , so i connect directly to my notebook.</P><P>the prob is i seems cannot ping my notebook.</P><P>configured same network and still cant ping to notebook , and vice versa</P><P></P><P>in the pix, ip address configured</P><P>permit icmp in+out configured</P><P>conduit permit icmp done</P><P>even tried applying ACL</P><P>but still to no avail</P><P></P><P>plus, i keep on receiveing this warning msg"configuration replication not supported .....config no longer synchro"</P><P></P><P>is there still any config inside, which cause basic connection to fail?</P> Fri, 21 Feb 2020 09:11:26 GMT https://community.cisco.com/t5/network-security/newbie-pix-525-problem/m-p/694490#M497387 asanparjo 2020-02-21T09:11:26Z Re: Newbie pix 525 problem https://community.cisco.com/t5/network-security/newbie-pix-525-problem/m-p/694491#M497394 <HTML><HEAD></HEAD><BODY><P>No but the real production problem with running a FO bundle by itself is that it will reboot itself every 24 hours. Post config and maybe we can help sort out your original issue.</P><P></P><P>HTH</P></BODY></HTML> Fri, 22 Sep 2006 12:30:36 GMT https://community.cisco.com/t5/network-security/newbie-pix-525-problem/m-p/694491#M497394 mmorris11 2006-09-22T12:30:36Z