topic Re: Split PPTP tunnel with PIX 501 in Network Security https://community.cisco.com/t5/network-security/split-pptp-tunnel-with-pix-501/m-p/644752#M497571 <HTML><HEAD></HEAD><BODY><P>hello Alex,</P><P></P><P>unfortunately, u dont have split-tunnels with PPTP. i havent seen any commands with respect to split-tunnels with PPTP. there are some docs on the net, which also confirms this. </P><P></P><P>anyway, u can implement IPSEC to have split-tunneling features enabled !!!! this is the best way of going about, since IPSEC also has encryption of the data packets...</P><P></P><P>hope this helps.. all the best... rate replies if found useful..</P><P></P><P>Raj</P></BODY></HTML> Wed, 13 Sep 2006 05:58:16 GMT sachinraja 2006-09-13T05:58:16Z Split PPTP tunnel with PIX 501 https://community.cisco.com/t5/network-security/split-pptp-tunnel-with-pix-501/m-p/644751#M497570 <P>Hi,</P><P></P><P>I have set up PPTP Remote VPN on PIX 501, it works fine, I am able to access resources on the remote office LAN. </P><P>Is it possible with PPTP to set split tunnel so I could access the Internet through the office LAN while connected to VPN? I tried </P><P>vpngroup PPTP_VPDN_GROUP split-tunnel split_acl </P><P>but this didn't work. When configuring VPN throuh PDM there is no check box for split tunnel for PPTP so I am wondering if this possible with PPTP at all?</P><P>On the other side I can set up Microsoft VPN client not to use remote gateway and I will be able to browse the Internet through the local connection but I would prefer to do it through remote LAN.</P><P></P><P>Any help is appreciated.</P><P>Thank you very much.</P><P></P><P>Alex</P> Fri, 21 Feb 2020 09:10:17 GMT https://community.cisco.com/t5/network-security/split-pptp-tunnel-with-pix-501/m-p/644751#M497570 augnevenok 2020-02-21T09:10:17Z Re: Split PPTP tunnel with PIX 501 https://community.cisco.com/t5/network-security/split-pptp-tunnel-with-pix-501/m-p/644752#M497571 <HTML><HEAD></HEAD><BODY><P>hello Alex,</P><P></P><P>unfortunately, u dont have split-tunnels with PPTP. i havent seen any commands with respect to split-tunnels with PPTP. there are some docs on the net, which also confirms this. </P><P></P><P>anyway, u can implement IPSEC to have split-tunneling features enabled !!!! this is the best way of going about, since IPSEC also has encryption of the data packets...</P><P></P><P>hope this helps.. all the best... rate replies if found useful..</P><P></P><P>Raj</P></BODY></HTML> Wed, 13 Sep 2006 05:58:16 GMT https://community.cisco.com/t5/network-security/split-pptp-tunnel-with-pix-501/m-p/644752#M497571 sachinraja 2006-09-13T05:58:16Z