topic Re: TCP Load Balancing with PIX? in Network Security https://community.cisco.com/t5/network-security/tcp-load-balancing-with-pix/m-p/571816#M499286 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P> It's not possible to do TCP load balancing using PIX.You have to use the dedicated load balancing device to accomplish this.I suggest you to use Cisco CSS Arrowpoint,BIGIP or Alteon for this.</P><P></P><P>Kindly let me know if you need more details on the dedicated load balancer with configuration.</P><P></P><P>cheers</P><P></P><P>Sachin</P></BODY></HTML> Tue, 18 Jul 2006 04:59:10 GMT sachinverma 2006-07-18T04:59:10Z TCP Load Balancing with PIX? https://community.cisco.com/t5/network-security/tcp-load-balancing-with-pix/m-p/571814#M499284 <P>Hi,</P><P></P><P>Is it possible to do TCP load balancing in a PIX 515E (running 6.3(4)) similar to IOS routers? We have two web servers sitting in the DMZ that we want to appear to the outside as single server. Any help/advice would be appreciated.</P> Fri, 21 Feb 2020 09:03:16 GMT https://community.cisco.com/t5/network-security/tcp-load-balancing-with-pix/m-p/571814#M499284 xactimed1 2020-02-21T09:03:16Z Re: TCP Load Balancing with PIX? https://community.cisco.com/t5/network-security/tcp-load-balancing-with-pix/m-p/571815#M499285 <HTML><HEAD></HEAD><BODY><P>Hi .. you can configure a network load balancing scenario between the two web servers. You need to refer to Microsoft doco for setting this up. Do a search for NLB ( network load balancing )</P><P></P><P><A class="jive-link-custom" href="http://support.microsoft.com/kb/303751/en-us" target="_blank">http://support.microsoft.com/kb/303751/en-us</A></P><P></P><P> On the pIX you only need to create a static NAT for the virtual ( clustered) IP address .. the load balancing will be done by the two servers.</P><P></P><P>I hope it helps ... please rate it if it does !!!</P><P></P><P></P></BODY></HTML> Mon, 17 Jul 2006 23:29:32 GMT https://community.cisco.com/t5/network-security/tcp-load-balancing-with-pix/m-p/571815#M499285 Fernando_Meza 2006-07-17T23:29:32Z Re: TCP Load Balancing with PIX? https://community.cisco.com/t5/network-security/tcp-load-balancing-with-pix/m-p/571816#M499286 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P> It's not possible to do TCP load balancing using PIX.You have to use the dedicated load balancing device to accomplish this.I suggest you to use Cisco CSS Arrowpoint,BIGIP or Alteon for this.</P><P></P><P>Kindly let me know if you need more details on the dedicated load balancer with configuration.</P><P></P><P>cheers</P><P></P><P>Sachin</P></BODY></HTML> Tue, 18 Jul 2006 04:59:10 GMT https://community.cisco.com/t5/network-security/tcp-load-balancing-with-pix/m-p/571816#M499286 sachinverma 2006-07-18T04:59:10Z