multiple time ranges on PIX 7.2

ihasdemi — Fri, 21 Feb 2020 08:57:43 GMT

hi all,

one of my customer is asking the possibility to configure multiple time ranges with PIX 515E ver7.2

thx & rgds

Isil

Re: multiple time ranges on PIX 7.2

gfullage — Wed, 14 Jun 2006 23:20:39 GMT

You've always had the ability to configure more than one time-range for use in ACL's, assuming that's the kind of time-range you're talking about.

ciscoasa(config)# sho ver

Cisco Adaptive Security Appliance Software Version 7.1(2)

......

ciscoasa(config)# sho time-range

time-range entry: Melbourne (inactive)

absolute start 02:00 01 March 2006 end 23:00 31 May 2006

used in: IP ACL entry

time-range entry: Sydney (inactive)

periodic weekdays 2:00 to 4:00

used in: IP ACL entry

ciscoasa(config)# sho access-list

access-list 100 line 1 extended permit ip any any time-range Melbourne (hitcnt=0)

access-list 101 line 1 extended deny ip any any time-range Sydney (hitcnt=0)

ciscoasa(config)#

ihasdemi — Thu, 15 Jun 2006 12:09:25 GMT

thx a lot

cheers