topic Re: PIX firewall port direction in Network Security

PIX firewall port direction

ddicky — Fri, 21 Feb 2020 08:55:43 GMT

I just have 1 fixed global IP address, need to setup web server,ftp & email on different internal servers.Any good link how to configured on port direction.

Re: PIX firewall port direction

m.sir — Sat, 27 May 2006 06:53:35 GMT

Static PAT Examples

To redirect webtraffic from the PIX Firewall outside interface to the inside host at 10.1.1.15, enter:

static (inside,outside) tcp interface www 10.1.1.15 www netmask 255.255.255.255

To redirect FTP traffic from the PIX Firewall outside interface to the inside host at 10.1.1.30, enter:

static (inside,outside) tcp interface ftp 10.1.1.30 ftp netmask 255.255.255.255

To redirect SMTP traffic from the PIX Firewall outside interface to the inside host at 10.1.1.30, enter:

static (inside,outside) tcp interface smtp 10.1.1.30 smtp netmask 255.255.255.255

Hope that helps, rate if it does

Re: PIX firewall port direction

a.kiprawih — Sat, 27 May 2006 13:01:58 GMT

Hi,

Using one (1) IP can be either a dedicated IP or firewall outside IP.

Example:

*http://www.cisco.com/en/US/partner/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a008017278e.html#wp1090663

*http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708b4.shtml#t10

Rgds,