topic Re: using PIX PDM in Network Security https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538291#M501844 <HTML><HEAD></HEAD><BODY><P>Thanks. That brings up the PDM in a separate window but, once again, if I just enter the p/w, I get a java error of "access denied."</P></BODY></HTML> Wed, 03 May 2006 15:14:46 GMT paulc 2006-05-03T15:14:46Z using PIX PDM https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538288#M501841 <P>I'm checking out using PDM on a 515 but when I enter my login name/pw which is what I use when I use CLI, it rejects it. Wouldn't the name/pw be the same or am I missing something here?</P> Fri, 21 Feb 2020 08:52:22 GMT https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538288#M501841 paulc 2020-02-21T08:52:22Z Re: using PIX PDM https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538289#M501842 <HTML><HEAD></HEAD><BODY><P>Hi try leaaing the username blank and use your enable password !!!</P><P></P><P>i hope it helps .. please rate it if it does !!!</P><P></P></BODY></HTML> Tue, 02 May 2006 22:50:26 GMT https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538289#M501842 Fernando_Meza 2006-05-02T22:50:26Z Re: using PIX PDM https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538290#M501843 <HTML><HEAD></HEAD><BODY><P>ooops i meant to say leaving username blank and passowrd should be the enable ,,,</P></BODY></HTML> Tue, 02 May 2006 22:51:30 GMT https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538290#M501843 Fernando_Meza 2006-05-02T22:51:30Z Re: using PIX PDM https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538291#M501844 <HTML><HEAD></HEAD><BODY><P>Thanks. That brings up the PDM in a separate window but, once again, if I just enter the p/w, I get a java error of "access denied."</P></BODY></HTML> Wed, 03 May 2006 15:14:46 GMT https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538291#M501844 paulc 2006-05-03T15:14:46Z Re: using PIX PDM https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538292#M501845 <HTML><HEAD></HEAD><BODY><P>It turns out this was a known issue with the version of PDM I was using, according to a Tech Support. I upgraded to the next version and was able to successfully log in to the system.</P></BODY></HTML> Fri, 05 May 2006 12:23:20 GMT https://community.cisco.com/t5/network-security/using-pix-pdm/m-p/538292#M501845 paulc 2006-05-05T12:23:20Z