topic pix 501 in Network Security https://community.cisco.com/t5/network-security/pix-501/m-p/535110#M501880 <P>i want to convert a pix 501 to a transparent firewall.can i still use the ports on the switch (e1-internal)) and if so will the ports behave like a hub or switch ?</P> Fri, 21 Feb 2020 08:52:14 GMT nkateko 2020-02-21T08:52:14Z pix 501 https://community.cisco.com/t5/network-security/pix-501/m-p/535110#M501880 <P>i want to convert a pix 501 to a transparent firewall.can i still use the ports on the switch (e1-internal)) and if so will the ports behave like a hub or switch ?</P> Fri, 21 Feb 2020 08:52:14 GMT https://community.cisco.com/t5/network-security/pix-501/m-p/535110#M501880 nkateko 2020-02-21T08:52:14Z Re: pix 501 https://community.cisco.com/t5/network-security/pix-501/m-p/535111#M501881 <HTML><HEAD></HEAD><BODY><P>I don't think that the 501 supports transparent firewalling, I believe this feature is exclusive to the 7.x and up software which does not run on 501 and 506's. </P><P></P><P>If you find a document that shows this capability please do share it here.</P><P></P><P>Patrick</P><P></P><P>Please rate any posts that are helpful.</P></BODY></HTML> Wed, 03 May 2006 06:21:48 GMT https://community.cisco.com/t5/network-security/pix-501/m-p/535111#M501881 Patrick Laidlaw 2006-05-03T06:21:48Z