topic Re: PIX command issue in Network Security https://community.cisco.com/t5/network-security/pix-command-issue/m-p/588010#M502213 <HTML><HEAD></HEAD><BODY><P>I think its misconfiguration a its not working</P><P>because ACL is in direction outside---&gt;inside</P><P>and </P><P>NAT which is using this ACL in direction inside----&gt;outside</P><P>So no traffic from access list TCP_PORT_RANGE cannot goes to inside interface and NAT rule cannot be aplied</P><P>M.</P><P></P><P></P><P></P><P></P></BODY></HTML> Fri, 21 Apr 2006 09:38:53 GMT m.sir 2006-04-21T09:38:53Z PIX command issue https://community.cisco.com/t5/network-security/pix-command-issue/m-p/588009#M502212 <P>Hi All,</P><P></P><P>Can anyone help on this command,</P><P></P><P>access-list TCP_PORT_RANGE permit tcp host 202.187.24.90 host 192.168.199.90 range 5500 5800</P><P>nat (inside) 10 access-list TCP_PORT_RANGE outside</P><P>global (outside) 10 202.187.24.90</P><P></P><P>Can anyone explain how this can work?</P><P>Not very clear what can be done with this command.</P><P>Thank you.</P><P></P><P></P><P>Rgds,</P><P>Au Yeong Shaw Voel</P> Fri, 21 Feb 2020 08:51:04 GMT https://community.cisco.com/t5/network-security/pix-command-issue/m-p/588009#M502212 shawvoel 2020-02-21T08:51:04Z Re: PIX command issue https://community.cisco.com/t5/network-security/pix-command-issue/m-p/588010#M502213 <HTML><HEAD></HEAD><BODY><P>I think its misconfiguration a its not working</P><P>because ACL is in direction outside---&gt;inside</P><P>and </P><P>NAT which is using this ACL in direction inside----&gt;outside</P><P>So no traffic from access list TCP_PORT_RANGE cannot goes to inside interface and NAT rule cannot be aplied</P><P>M.</P><P></P><P></P><P></P><P></P></BODY></HTML> Fri, 21 Apr 2006 09:38:53 GMT https://community.cisco.com/t5/network-security/pix-command-issue/m-p/588010#M502213 m.sir 2006-04-21T09:38:53Z