topic Help me! Problem with Pix 501 in Network Security

Help me! Problem with Pix 501

minhhples — Fri, 21 Feb 2020 12:42:16 GMT

I'm using Pix 501 with firmware: Version 6.3(3)

I have problem with Pix 501:

+ transfer rate data between interface outside and inside very slow, even between 2 interface inside.

+ I have test file transfer between 2 PC connect via interface inside.

+ Results transfer 1 file 1MB with total time 60s

I don't upgrade software current from 6.3(3) to 6.3(5) via TFTP. It's error Please see attach file

Please help me to solve this problem.

Thanks for support.

jurodri3 — Thu, 25 Oct 2012 21:48:59 GMT

Thank you for your question.

However, the Small Business Support Community is limited to Cisco Small Business Products and the PIX501 is considered as an Enterprise class device.

In the next link you will find the area that may help you further with your question.

Best regards,

Diego Rodriguez

Cisco Small Business Community Engineer.

cindy toy — Fri, 26 Oct 2012 06:06:11 GMT

Hi Minh,

I have moved your question into the correct area within the Cisco Support Communities.

Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport