H.323 timeout

RRFS578780 — Fri, 21 Feb 2020 17:38:23 GMT

After a disconnection occurred in a video conference, troubleshooting was initiated to identify the root cause. After log analysis, we found that the call was disconnected by H.323 timeout.

However, I would like to know if you have any ASA parsing or configuration to create an exception regarding possible H323 traffic timeout:

Re: H.323 timeout

Sheraz.Salim — Tue, 29 Oct 2019 10:07:23 GMT

Configuring H.323 and H.225 Timeout Values

To configure the idle time after which an H.225 signalling connection is closed, use the timeout h225 command. The default for H.225 timeout is one hour.

To configure the idle time after which an H.323 control connection is closed, use the timeout h323 command. The default is five minutes.

https://www.cisco.com/c/en/us/td/docs/security/asa/asa82/configuration/guide/config/inspect_voicevideo.html#wp1229352

topic Re: H.323 timeout in Network Security

H.323 timeout

Re: H.323 timeout

Configuring H.323 and H.225 Timeout Values