topic Re: Moving configuration between PIX's in Network Security https://community.cisco.com/t5/network-security/moving-configuration-between-pix-s/m-p/588765#M525914 <HTML><HEAD></HEAD><BODY><P>Have you loaded the password recovery file through tftp, and you still could not erase the password????</P><P></P><P>It should work, make sure you are downloading the right file (for 6.2) and make sure you loaded through tftp, and it should work fine...</P><P></P><P>Regards, </P></BODY></HTML> Mon, 03 Apr 2006 13:10:00 GMT oabduo983 2006-04-03T13:10:00Z Moving configuration between PIX's https://community.cisco.com/t5/network-security/moving-configuration-between-pix-s/m-p/588762#M525903 <P></P><P>Hi,</P><P></P><P>Is there a documented procedure for moving config's between PIX's? Basically we have a PIX cluster (515's running 6.2) and want to test the upgrade. So we've borrowed another 515, put our running config on to it - but suprise, suprise can't login. I assume mis-matching keys for AAA etc. Not knowing too much about this I'm wondering if there is a set procedure for dealing with this? I assume there is since people replacing hardware must happen quite often. Tried searching the knowledge base but....</P> Fri, 21 Feb 2020 08:48:33 GMT https://community.cisco.com/t5/network-security/moving-configuration-between-pix-s/m-p/588762#M525903 faxfan2002 2020-02-21T08:48:33Z Re: Moving configuration between PIX's https://community.cisco.com/t5/network-security/moving-configuration-between-pix-s/m-p/588763#M525907 <HTML><HEAD></HEAD><BODY><P>You have to do a password recovery !</P><P></P><P>See this document:</P><P></P><P>Password Recovery and AAA Configuration Recovery Procedure for the PIX:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml</A></P><P></P><P>sincerely</P><P>Patrick</P></BODY></HTML> Wed, 29 Mar 2006 16:47:03 GMT https://community.cisco.com/t5/network-security/moving-configuration-between-pix-s/m-p/588763#M525907 Patrick Iseli 2006-03-29T16:47:03Z Re: Moving configuration between PIX's https://community.cisco.com/t5/network-security/moving-configuration-between-pix-s/m-p/588764#M525911 <HTML><HEAD></HEAD><BODY><P>I've done that and no joy!!!</P></BODY></HTML> Wed, 29 Mar 2006 19:22:10 GMT https://community.cisco.com/t5/network-security/moving-configuration-between-pix-s/m-p/588764#M525911 faxfan2002 2006-03-29T19:22:10Z Re: Moving configuration between PIX's https://community.cisco.com/t5/network-security/moving-configuration-between-pix-s/m-p/588765#M525914 <HTML><HEAD></HEAD><BODY><P>Have you loaded the password recovery file through tftp, and you still could not erase the password????</P><P></P><P>It should work, make sure you are downloading the right file (for 6.2) and make sure you loaded through tftp, and it should work fine...</P><P></P><P>Regards, </P></BODY></HTML> Mon, 03 Apr 2006 13:10:00 GMT https://community.cisco.com/t5/network-security/moving-configuration-between-pix-s/m-p/588765#M525914 oabduo983 2006-04-03T13:10:00Z