topic Support for 3GE/2FE on a PIX 525 in Network Security

Support for 3GE/2FE on a PIX 525

phaddad — Fri, 21 Feb 2020 08:47:24 GMT

Is this a supported HW configuration? It isn't listed

as such in the install manual. I'm guessing that the

2 built-in interfaces aren't listed in that table

in the install manual, just the interfaces that can

be added via the PCI slots.

Peter

thamdani — Wed, 22 Mar 2006 09:13:12 GMT

Hi,

Check the list of options for number of interfaces you can use on pix-525.It will depend on the License you have in pix.

Hope this helps.

Tanveer

phaddad — Thu, 23 Mar 2006 18:15:41 GMT

Actually your link points to the same table I

referenced in my earlier post. My interpretation

of this table is that it shows the possible

combinations of interfaces that can be installed

using the 3 PCI slots, and doesn't include the

2 built-in FE interfaces.

I tested this by installing 3GE PCI cards, and all

the interfaces (3GE + 2FE) are recognized by the OS,

so I'm assuming that this is a supported configuration.

thanks,

Peter