topic Pix V7 query on syslogging in Network Security https://community.cisco.com/t5/network-security/pix-v7-query-on-syslogging/m-p/517535#M528069 <P>Hi all,</P><P></P><P>We have a 515E running Fos 7 .We need to configure the pix to log to two hosts with different trap levels.</P><P>ie to host A on trap info and host B on trap warning...why this is required is </P><P>Host B is behind a low bandwidth pipe .</P><P></P><P>Any pointers appreciated </P><P></P> Fri, 21 Feb 2020 08:41:09 GMT mbalasubramanian 2020-02-21T08:41:09Z Pix V7 query on syslogging https://community.cisco.com/t5/network-security/pix-v7-query-on-syslogging/m-p/517535#M528069 <P>Hi all,</P><P></P><P>We have a 515E running Fos 7 .We need to configure the pix to log to two hosts with different trap levels.</P><P>ie to host A on trap info and host B on trap warning...why this is required is </P><P>Host B is behind a low bandwidth pipe .</P><P></P><P>Any pointers appreciated </P><P></P> Fri, 21 Feb 2020 08:41:09 GMT https://community.cisco.com/t5/network-security/pix-v7-query-on-syslogging/m-p/517535#M528069 mbalasubramanian 2020-02-21T08:41:09Z Re: Pix V7 query on syslogging https://community.cisco.com/t5/network-security/pix-v7-query-on-syslogging/m-p/517536#M528071 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I dont think that is possible in pix ,reason being logging host and logging trap are global commands,what ever trap level you will define will be implemented for both logging hosts.</P><P></P><P>check the "logging class" command in pix 7.0.Even though it will not help in your case but may be its of any help for different scenario.</P></BODY></HTML> Wed, 01 Feb 2006 11:28:21 GMT https://community.cisco.com/t5/network-security/pix-v7-query-on-syslogging/m-p/517536#M528071 thamdani 2006-02-01T11:28:21Z