topic Re: Logging IP access on a PIX 515E with 6.2(2) in Network Security

Logging IP access on a PIX 515E with 6.2(2)

brian.wilson — Fri, 21 Feb 2020 08:39:58 GMT

Sorry, I did not find this in a search. I need to figure out how to log what IPs access specific host only. I have a PIX 515E running 6.2(2) and no other devices to use for this - no router, etc., nor do we run any auth servers. I've used the 'log' parameter on router ACLs many times but don't see that in this version of PIX. Thanks in advance.

Re: Logging IP access on a PIX 515E with 6.2(2)

varakantam — Wed, 25 Jan 2006 01:06:48 GMT

PIX ACL's support 'log' action as well; you need to tune it accoring to your requiremnet (add to permit statements)

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_configuration_guide_chapter09186a0080450bf0.html#wp1061635

Re: Logging IP access on a PIX 515E with 6.2(2)

brian.wilson — Mon, 30 Jan 2006 20:47:48 GMT

I don't see that option in version 6.2(2) at least it won't let me use it in the access-list line? What am I missing.

Thank you.

Re: Logging IP access on a PIX 515E with 6.2(2)

pkhatri — Tue, 31 Jan 2006 00:00:21 GMT

Hi Brian,

The logging facility for PIX ACLs was not introduced until release 6.3. THe following link has some info on it:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/63rnotes/pixrn63.htm#wp68356

I'm afraid you'll have to upgrade to get this functionality.

Hope that helps - pls rate the post if it does.

Paresh