topic Re: PIX firewall between application and database server in Network Security https://community.cisco.com/t5/network-security/pix-firewall-between-application-and-database-server/m-p/448293#M529454 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>In the first point i would suggest to check out the duplex/speed settings configured on the firewall ports as well as on the ports where the firewall is getting connected..</P><P></P><P>you can view the interface status using show interface command on both the sides..</P><P></P><P>If you are sure about the duplex/speed on the ports and still getting some errors would suggest to check out for a change in the cable which is conencting the firewall to the switch or server..</P><P></P><P>regds</P><P></P></BODY></HTML> Fri, 16 Dec 2005 12:11:14 GMT spremkumar 2005-12-16T12:11:14Z PIX firewall between application and database server https://community.cisco.com/t5/network-security/pix-firewall-between-application-and-database-server/m-p/448292#M529452 <P>Hi</P><P></P><P>i have problem in my data center.I have PIX firewall which sits between an application </P><P>server and database server both belong to different subnets.</P><P>When i am trying to access the application server which inturn fetches the request/data </P><P>from database server.Following are the observations</P><P>1.when firewall is there</P><P></P><P>No consistency to get the data from database server like it takes 2/10/28/100 secs </P><P></P><P>2. when firewall is not there</P><P></P><P>There is consistency to get the data from database server like it takes less than 5secs.</P><P></P><P>Please give me suggestions to overcome this problem.</P><P></P><P>what configuration changes need to be done in firewall?</P><P>what needs to be checked in firewall?</P><P></P><P>or any additional inputs to solve this problem</P><P></P><P>I did troubleshooting but i couldnt able to make it out.</P> Fri, 21 Feb 2020 08:35:52 GMT https://community.cisco.com/t5/network-security/pix-firewall-between-application-and-database-server/m-p/448292#M529452 munnupavan 2020-02-21T08:35:52Z Re: PIX firewall between application and database server https://community.cisco.com/t5/network-security/pix-firewall-between-application-and-database-server/m-p/448293#M529454 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>In the first point i would suggest to check out the duplex/speed settings configured on the firewall ports as well as on the ports where the firewall is getting connected..</P><P></P><P>you can view the interface status using show interface command on both the sides..</P><P></P><P>If you are sure about the duplex/speed on the ports and still getting some errors would suggest to check out for a change in the cable which is conencting the firewall to the switch or server..</P><P></P><P>regds</P><P></P></BODY></HTML> Fri, 16 Dec 2005 12:11:14 GMT https://community.cisco.com/t5/network-security/pix-firewall-between-application-and-database-server/m-p/448293#M529454 spremkumar 2005-12-16T12:11:14Z Re: PIX firewall between application and database server https://community.cisco.com/t5/network-security/pix-firewall-between-application-and-database-server/m-p/448294#M529457 <HTML><HEAD></HEAD><BODY><P>just wondering what the model is, and how the actual traffic flow looks like. maybe the issue is related to heavy load.</P></BODY></HTML> Sun, 18 Dec 2005 23:12:11 GMT https://community.cisco.com/t5/network-security/pix-firewall-between-application-and-database-server/m-p/448294#M529457 jackko 2005-12-18T23:12:11Z