topic Re: Downloading software from PIX to TFTP server in Network Security

Downloading software from PIX to TFTP server

mitchen — Fri, 21 Feb 2020 08:34:41 GMT

I know on a router I can copy the software currently stored on the router's flash to my TFTP server by using the command copy flash tftp.

But is it possible to copy the software thats currently on my PIX to a TFTP server? If so, what are the commands to use?

The reason I ask is that we don't currently have local copies of our PIX/router software so I was wanting to make sure we had a library of all software in use (for recovery purposes, etc)

Re: Downloading software from PIX to TFTP server

spremkumar — Wed, 07 Dec 2005 11:26:13 GMT

A query similar to your requirement and the answer is you cant..

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=Firewalling&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd9f0a1

but usnig write command you can backup ur config to an external tftp server..

regds

Re: Downloading software from PIX to TFTP server

mitchen — Wed, 07 Dec 2005 14:41:49 GMT

Hi,

Ok, thanks for the response. Thats what I feared! Will try to make sure we store software versions locally from now on aswell as installing them on the devices!

Thanks,

Neil

Re: Downloading software from PIX to TFTP server

jackko — Wed, 07 Dec 2005 22:58:51 GMT

providing there is a smartnet with the pix (i.e. cisco service agreement warranty thing), you can download the image from cisco.com

Re: Downloading software from PIX to TFTP server

mitchen — Thu, 08 Dec 2005 09:32:03 GMT

Hi Jakko,

unfortunately the particular version of software 6.3(3) doesn't seem to be available in the Download Center anymore though.

Neil

Re: Downloading software from PIX to TFTP server

jackko — Thu, 08 Dec 2005 09:45:22 GMT

in that case, you can open a case with the cisco tac requesting the image.