Bandwidth monitoring in PIX 535

mukundh86 — Mon, 11 Mar 2019 21:30:23 GMT

Hi all

Is there a way I can generate bandwidth reports on Cisco PIX 535 ?

Mukundh

Bandwidth monitoring in PIX 535

JORGE RODRIGUEZ — Tue, 27 Sep 2011 03:37:54 GMT

Mukundh,

You can use PDM which is the gui interface, and under monitoring you can pool some interface graphs from there , this is if your pix is still running 6.x or prior codes and PDM , see graphs bellow

http://www.cisco.com/en/US/docs/security/pix/pix63/pdm30/olh/PDF_Version_-_PDM_OLH/pdm30olh.pdf

If under version code 8x use ASDM gui interface graphs section

http://www.cisco.com/en/US/partner/docs/security/asa/asa83/asdm63/configuration_guide/intrface.html#wp1345760

You can also use 3rd party such as prtg and monitor eirther the interfaces the firewalls are connected to or firewalls interfaces via snmp , there is a prtg freeware out there not sure if still freeware , you can google it.

http://www.paessler.com/prtg

Regards

topic Bandwidth monitoring in PIX 535 in Network Security

Bandwidth monitoring in PIX 535

Bandwidth monitoring in PIX 535