Upgrade PIX 506 from version 6.1(2) to Version 6.3(5)

pokwan — Fri, 21 Feb 2020 08:32:46 GMT

Hi,

Below is a sh ver of the PIX 506. Is there anything we should be aware of (ie. activation key... etc) with the upgrade?

TIA.

sh ver

Cisco PIX Firewall Version 6.1(2)

Cisco PIX Device Manager Version 1.1(2)

Compiled on Mon 31-Dec-01 08:44 by morlee

Pix up 80 days 22 hours

Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 299 MHz

Flash E28F640J3 @ 0x300, 8MB

BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: ethernet0: address is 0009.7cb4.06c0, irq 10

1: ethernet1: address is 0009.7cb4.06c1, irq 11

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES: Enabled

Maximum Interfaces: 2

Cut-through Proxy: Enabled

Guards: Enabled

Websense: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

ISAKMP peers: Unlimited

Serial Number: 406170618 (0x1835abfa)

Activation Key: 0x65c52c45 0x4a466da7 0xd38f5a70 0x1747d554

Re: Upgrade PIX 506 from version 6.1(2) to Version 6.3(5)

nkhawaja — Thu, 24 Nov 2005 00:50:30 GMT

there shouldnt be any issue in this upgrade.

thanks

Nadeem