topic Re: re-configuring pix in Network Security

re-configuring pix

toyinsekoni — Fri, 21 Feb 2020 08:32:20 GMT

I am unable to logon through PDM (pix 501)cos i have forgotten the password and the pwd recovery for pix doesn't work for the PDM. If i decide to erase my pix or set it to factory configuration, will that reset the PDM password. How do i erase everything(configuration) i have on my pix (501), like erase startup-config or /all in a router, so i could start afresh.

Thanks

Daniel.

Re: re-configuring pix

nkhawaja — Sat, 19 Nov 2005 19:26:32 GMT

hi,

yes once you erase the pix config, the pdm password also gets erased. but why erase the config, if password recovery can be done.

follow the directions here.

http://www.cisco.com/warp/public/110/34.shtml

thanks,

Nadeem

Re: re-configuring pix

s.elmrabet — Sat, 19 Nov 2005 21:12:19 GMT

Normaly if you do the PWD recovery for the pix you enable password and passwd are reseted to default password so you can access you pix either using console, telnet, ssh or PDM

I want to be sure if you use no user and just the enable password to login using pdm or you use a username and password

if you use a username and password please check your config file and try to modify the username password that you use for login or delete it and add a new username

Regards