topic Re: PIX Access options in Network Security https://community.cisco.com/t5/network-security/pix-access-options/m-p/502641#M531873 <HTML><HEAD></HEAD><BODY><P>telnet access is not allowed on pix outside interface regardless of the configuration.</P><P></P><P>one way is to configure ssh on the pix.</P><P></P><P>e.g</P><P>hostname xxx</P><P>domain-name xxx.com.au</P><P>ca generate rsa key 1024</P><P>ca save all</P><P>ssh <TRUSTED ip=""> <MASK> outside</MASK></TRUSTED></P></BODY></HTML> Thu, 13 Oct 2005 02:59:31 GMT jackko 2005-10-13T02:59:31Z PIX Access options https://community.cisco.com/t5/network-security/pix-access-options/m-p/502640#M531872 <P>I have a remote Pix 501 running 6.3.4 I am trying to access it from the outside interface and have configured it to allow telnet from my IP address but I cannot connect. </P><P>I used the command</P><P>telnet XX.XX.XX.XX 255.255.255.255 outside(XX.XX.XX.XX) is the IP address I am coming from</P><P>this is not working, is there anything else I need to enable to make this work</P> Fri, 21 Feb 2020 08:27:45 GMT https://community.cisco.com/t5/network-security/pix-access-options/m-p/502640#M531872 relsethagen 2020-02-21T08:27:45Z Re: PIX Access options https://community.cisco.com/t5/network-security/pix-access-options/m-p/502641#M531873 <HTML><HEAD></HEAD><BODY><P>telnet access is not allowed on pix outside interface regardless of the configuration.</P><P></P><P>one way is to configure ssh on the pix.</P><P></P><P>e.g</P><P>hostname xxx</P><P>domain-name xxx.com.au</P><P>ca generate rsa key 1024</P><P>ca save all</P><P>ssh <TRUSTED ip=""> <MASK> outside</MASK></TRUSTED></P></BODY></HTML> Thu, 13 Oct 2005 02:59:31 GMT https://community.cisco.com/t5/network-security/pix-access-options/m-p/502641#M531873 jackko 2005-10-13T02:59:31Z