topic Re: pix 525 failover in Network Security https://community.cisco.com/t5/network-security/pix-525-failover/m-p/486906#M532096 <HTML><HEAD></HEAD><BODY><P>just wondering under what sort of circumstances you were using the command "wri standby".</P><P></P><P>"wri standby" should be used if the primary and secondary units&#146; configurations have</P><P>different information.</P><P></P><P>normally, the failover unit will auto obtain the config when the primary unit boots up or "wri mem" on the primary unit.</P></BODY></HTML> Sun, 09 Oct 2005 11:21:32 GMT jackko 2005-10-09T11:21:32Z pix 525 failover https://community.cisco.com/t5/network-security/pix-525-failover/m-p/486905#M532094 <P>hello,</P><P>I've a pair of pix 525 active/standby, running pix os 6.3(4). When I'm issuing the command write standby both pixs doing a rest. any idea why this happening ??</P><P>Thanks,</P><P>Simon</P><P></P> Fri, 21 Feb 2020 08:27:05 GMT https://community.cisco.com/t5/network-security/pix-525-failover/m-p/486905#M532094 sssbbbmmm 2020-02-21T08:27:05Z Re: pix 525 failover https://community.cisco.com/t5/network-security/pix-525-failover/m-p/486906#M532096 <HTML><HEAD></HEAD><BODY><P>just wondering under what sort of circumstances you were using the command "wri standby".</P><P></P><P>"wri standby" should be used if the primary and secondary units&#146; configurations have</P><P>different information.</P><P></P><P>normally, the failover unit will auto obtain the config when the primary unit boots up or "wri mem" on the primary unit.</P></BODY></HTML> Sun, 09 Oct 2005 11:21:32 GMT https://community.cisco.com/t5/network-security/pix-525-failover/m-p/486906#M532096 jackko 2005-10-09T11:21:32Z