topic asa failover pair in Network Security https://community.cisco.com/t5/network-security/asa-failover-pair/m-p/1779601#M532148 <HTML><HEAD></HEAD><BODY><P>Hi Kris,</P><P></P><P>Kindly go through this doc, this would clear all your questions regarding the failover and connectivity bnetween two boxes:</P><P></P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml</A></P><P></P><P>Hope this helps.</P><P></P><P>Thanks,</P><P>Varun</P></BODY></HTML> Tue, 30 Aug 2011 17:32:43 GMT varrao 2011-08-30T17:32:43Z asa failover pair https://community.cisco.com/t5/network-security/asa-failover-pair/m-p/1779600#M532147 <P>Hi,</P><P></P><P>This may be a stupid question, but if I have an active/passive pair how do I connect to the passive box? I need to upload a any connect image.</P><P></P><P>Sent from Cisco Technical Support iPad App</P> Mon, 11 Mar 2019 21:18:41 GMT https://community.cisco.com/t5/network-security/asa-failover-pair/m-p/1779600#M532147 Kris Wolton 2019-03-11T21:18:41Z asa failover pair https://community.cisco.com/t5/network-security/asa-failover-pair/m-p/1779601#M532148 <HTML><HEAD></HEAD><BODY><P>Hi Kris,</P><P></P><P>Kindly go through this doc, this would clear all your questions regarding the failover and connectivity bnetween two boxes:</P><P></P><P><A class="jive-link-external-small" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml</A></P><P></P><P>Hope this helps.</P><P></P><P>Thanks,</P><P>Varun</P></BODY></HTML> Tue, 30 Aug 2011 17:32:43 GMT https://community.cisco.com/t5/network-security/asa-failover-pair/m-p/1779601#M532148 varrao 2011-08-30T17:32:43Z asa failover pair https://community.cisco.com/t5/network-security/asa-failover-pair/m-p/1779602#M532150 <HTML><HEAD></HEAD><BODY><P>You can telnet/ssh into the physical address of the passive unit. (Note: This is the address that you assigned the standby when it's not in the primary state. It's the physical address of the inside interface.)</P><P></P><P>HTH,</P><P>John</P></BODY></HTML> Tue, 30 Aug 2011 19:23:02 GMT https://community.cisco.com/t5/network-security/asa-failover-pair/m-p/1779602#M532150 John Blakley 2011-08-30T19:23:02Z Re: asa failover pair https://community.cisco.com/t5/network-security/asa-failover-pair/m-p/1779603#M532152 <HTML><HEAD></HEAD><BODY><P>hi, turns out I had not configured an ip address to the second box, called Cisco tac and they assisted me configuring one, all good now.</P><P></P><P>Sent from Cisco Technical Support iPad App</P></BODY></HTML> Thu, 27 Oct 2011 09:58:41 GMT https://community.cisco.com/t5/network-security/asa-failover-pair/m-p/1779603#M532152 Kris Wolton 2011-10-27T09:58:41Z