topic PIX interfaces Query in Network Security https://community.cisco.com/t5/network-security/pix-interfaces-query/m-p/476333#M532313 <P>hi,</P><P></P><P>i have a PIX 525 with 2 FE ports and 1 Gig Port. I wanted to use the GIG as the inside interface. Is it possible to swap the Inside from Fe to GIG and used the FE for DMZ?</P><P></P><P>regds,</P><P>T Singh</P><P></P> Fri, 21 Feb 2020 08:26:39 GMT tripat-singh 2020-02-21T08:26:39Z PIX interfaces Query https://community.cisco.com/t5/network-security/pix-interfaces-query/m-p/476333#M532313 <P>hi,</P><P></P><P>i have a PIX 525 with 2 FE ports and 1 Gig Port. I wanted to use the GIG as the inside interface. Is it possible to swap the Inside from Fe to GIG and used the FE for DMZ?</P><P></P><P>regds,</P><P>T Singh</P><P></P> Fri, 21 Feb 2020 08:26:39 GMT https://community.cisco.com/t5/network-security/pix-interfaces-query/m-p/476333#M532313 tripat-singh 2020-02-21T08:26:39Z Re: PIX interfaces Query https://community.cisco.com/t5/network-security/pix-interfaces-query/m-p/476334#M532314 <HTML><HEAD></HEAD><BODY><P>it should work in theory, as long as you modify the security level appropriately for each interface.</P><P></P><P>the golden rule of pix is that traffic from interface with higher security level to an interface with lower security level is permitted.</P><P></P></BODY></HTML> Thu, 06 Oct 2005 11:13:16 GMT https://community.cisco.com/t5/network-security/pix-interfaces-query/m-p/476334#M532314 jackko 2005-10-06T11:13:16Z