topic Re: PIX 501 Setup in Network Security https://community.cisco.com/t5/network-security/pix-501-setup/m-p/407839#M532971 <HTML><HEAD></HEAD><BODY><P>Nik,</P><P></P><P>Here's a document on how to setup PPTP access via PIX:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml</A></P><P></P><P>And here's a very good example document (PDF format) by Zandernetworks on how to setup L2TP access via PIX:</P><P></P><P><A class="jive-link-custom" href="http://www.zandernetworks.co.uk/technotes/Tech%20Note%2004.pdf" target="_blank">http://www.zandernetworks.co.uk/technotes/Tech%20Note%2004.pdf</A></P><P></P><P>Hope the above helps and if you need further help then let me know. If it does help please rate post as it may help others.</P><P></P><P>Thanks</P><P></P><P>Jay</P></BODY></HTML> Sun, 18 Sep 2005 19:57:45 GMT jmia 2005-09-18T19:57:45Z PIX 501 Setup https://community.cisco.com/t5/network-security/pix-501-setup/m-p/407838#M532970 <P>Hi</P><P>Des anyone have a standard setup for a PIX 501 with one externally routable IP Address on the outside, and an internal network interface of 192.168.10.150, to allow Microsft VPN clients to authenticate via L2TP or PPTP, and browse the internal network (192.168.0.0/16)</P><P></P><P>Thanks in advance.</P> Fri, 21 Feb 2020 08:24:16 GMT https://community.cisco.com/t5/network-security/pix-501-setup/m-p/407838#M532970 nikrushworth031168 2020-02-21T08:24:16Z Re: PIX 501 Setup https://community.cisco.com/t5/network-security/pix-501-setup/m-p/407839#M532971 <HTML><HEAD></HEAD><BODY><P>Nik,</P><P></P><P>Here's a document on how to setup PPTP access via PIX:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml" target="_blank">http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml</A></P><P></P><P>And here's a very good example document (PDF format) by Zandernetworks on how to setup L2TP access via PIX:</P><P></P><P><A class="jive-link-custom" href="http://www.zandernetworks.co.uk/technotes/Tech%20Note%2004.pdf" target="_blank">http://www.zandernetworks.co.uk/technotes/Tech%20Note%2004.pdf</A></P><P></P><P>Hope the above helps and if you need further help then let me know. If it does help please rate post as it may help others.</P><P></P><P>Thanks</P><P></P><P>Jay</P></BODY></HTML> Sun, 18 Sep 2005 19:57:45 GMT https://community.cisco.com/t5/network-security/pix-501-setup/m-p/407839#M532971 jmia 2005-09-18T19:57:45Z