URL Blocking question

edwmsedwms — Mon, 11 Mar 2019 21:14:30 GMT

Forgive me if my post sounds elementary; I'm not an IT guy. My company has a peer to peer network of 10 personal computers without a server. Operating systems from Windows XP to Vista. I've recently installed a Cisco RV120W Wireless-N VPN Firewall. It's configured in DHCP Server Mode with printers/copiers that have static IPs below the DHCP range.

I'm having a problem with certain stations being used for personal networking, shopping, etc. during business hours. Consequently I would like to limit internet access on these stations. However, some internet access is required because of online database software that's an integral part of our business. I've been reading in the Adminstration Guide about URL Blocking. Would it be possible to give static IPs to certain stations and then limit their internet access to 1 or 2 specific websites? If so, please explain or point me in the right direction.

FYI, I've read about the Trusted Domains and Blocked Keywords but cannot quite understand how to parle this into the solution I need.

Many thanks!

URL Blocking question

Parminder Sian — Mon, 22 Aug 2011 06:45:24 GMT

Hi,

If you have a PIX/Cisco ASA on network then following docs might help, however if no PIX firewalls of ASA's are involved then you might as well post your issue on Microsoft forums.

https://supportforums.cisco.com/docs/DOC-1268

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940c5a.shtml

PS:- You need a IT guy to accomplish something like this.

Hope this helps,

Sian

topic URL Blocking question in Network Security

URL Blocking question

URL Blocking question