topic Re: logging to syslog from PIX in Network Security

logging to syslog from PIX

contsystems — Fri, 21 Feb 2020 08:23:32 GMT

Anyone can explain why I have two lines in syslog for every connection build or teardown?

syslog server is Kiwi and I disabled logging standby.

Thank in advance. Alex M.

mehrdad — Wed, 14 Sep 2005 02:02:58 GMT

pls note that the logging standby command lets the failover standby unit send syslog messages.

you can specify syslog host,facility and level by below commands :

logging host [in_if_name] ip_address [protocol /port]

logging facility (default is 20 :: LOCAL4)

logging trap level (Set logging level only for syslog messages)

0—emergencies—System unusable messages

1—alerts—Take immediate action

2—critical—Critical condition

3—errors—Error message

4—warnings—Warning message

5—notifications—Normal but significant condition

6—informational—Information message

7—debugging—Debug messages and log FTP commands and WWW URLs

contsystems — Thu, 15 Sep 2005 21:21:18 GMT

Thank you for reply, mehrdad,

but I have mentioned in initial message that logging standby already disabled.

Any other ideas, anyone?