topic PIX is not booting up in Network Security https://community.cisco.com/t5/network-security/pix-is-not-booting-up/m-p/484584#M533348 <P>My PIX515E-R (6.3(3))got rebooted automatically and now not booting up. I am getting only this message on console </P><P>"CISCO SYSTEMS PIX FIREWALL</P><P>Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73</P><P>Compiled by morlee</P><P>32 MB RAM</P><P></P><P> </P><P></P><P>PCI Device Table.</P><P>Bus Dev Func VendID DevID Class Irq</P><P> 00 00 00 8086 7192 Host Bridge</P><P> 00 07 00 8086 7110 ISA Bridge</P><P> 00 07 01 8086 7111 IDE Controller</P><P> 00 07 02 8086 7112 Serial Bus 9</P><P> 00 07 03 8086 7113 PCI Bridge</P><P> 00 0D 00 8086 1209 Ethernet 11</P><P> 00 0E 00 8086 1209 Ethernet 10</P><P> 00 13 00 8086 1229 Ethernet 5"</P><P></P><P>Can someone guide me what could be the reason and how to go further</P><P></P><P></P> Fri, 21 Feb 2020 08:23:17 GMT adi_tyaa 2020-02-21T08:23:17Z PIX is not booting up https://community.cisco.com/t5/network-security/pix-is-not-booting-up/m-p/484584#M533348 <P>My PIX515E-R (6.3(3))got rebooted automatically and now not booting up. I am getting only this message on console </P><P>"CISCO SYSTEMS PIX FIREWALL</P><P>Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73</P><P>Compiled by morlee</P><P>32 MB RAM</P><P></P><P> </P><P></P><P>PCI Device Table.</P><P>Bus Dev Func VendID DevID Class Irq</P><P> 00 00 00 8086 7192 Host Bridge</P><P> 00 07 00 8086 7110 ISA Bridge</P><P> 00 07 01 8086 7111 IDE Controller</P><P> 00 07 02 8086 7112 Serial Bus 9</P><P> 00 07 03 8086 7113 PCI Bridge</P><P> 00 0D 00 8086 1209 Ethernet 11</P><P> 00 0E 00 8086 1209 Ethernet 10</P><P> 00 13 00 8086 1229 Ethernet 5"</P><P></P><P>Can someone guide me what could be the reason and how to go further</P><P></P><P></P> Fri, 21 Feb 2020 08:23:17 GMT https://community.cisco.com/t5/network-security/pix-is-not-booting-up/m-p/484584#M533348 adi_tyaa 2020-02-21T08:23:17Z Re: PIX is not booting up https://community.cisco.com/t5/network-security/pix-is-not-booting-up/m-p/484585#M533349 <HTML><HEAD></HEAD><BODY><P>i had the same issue before with a failover unit.</P><P></P><P>i removed all the nic to start with. put back one at a time and i did identify a nic was faulty.</P></BODY></HTML> Tue, 13 Sep 2005 01:51:19 GMT https://community.cisco.com/t5/network-security/pix-is-not-booting-up/m-p/484585#M533349 jackko 2005-09-13T01:51:19Z