topic Re: Clear traffic stats on a Pix in Network Security

Clear traffic stats on a Pix

smiller — Fri, 21 Feb 2020 08:21:15 GMT

I've tried the "clear traffic" command yet I don't see the stats being reset.

jmia — Fri, 26 Aug 2005 14:33:25 GMT

Hi,

Do you mean you want to clear ACL hit counts? If so then in config mode do:

clear access-list counters

Do you mean that you want to clear the active translations on the PIX, if so then do:

clear xlate

Hope this helps, if it does please rate post.

smiller — Fri, 26 Aug 2005 14:46:50 GMT

I mean the stats that appear with the command "show interface ethernetx".

jmia — Fri, 26 Aug 2005 15:01:17 GMT

OK,

Do in config mode:

clear int e0 counters OR clear int e1 counters

Hope this helps and please rate post if it does.

smiller — Fri, 26 Aug 2005 15:13:42 GMT

Thanks jmia, it did the trick.