topic Re: PIX Version 7, no nat-control in Network Security https://community.cisco.com/t5/network-security/pix-version-7-no-nat-control/m-p/495808#M534075 <HTML><HEAD></HEAD><BODY><P>Thanks, but never mind. I answered my own question through upgrade process. </P><P>Entering "no nat-control" will let access through with no translation, but you can still enter a nat/global pair and it WILL translate and function correctly.</P><P></P></BODY></HTML> Wed, 17 Aug 2005 18:41:45 GMT rsmith 2005-08-17T18:41:45Z PIX Version 7, no nat-control https://community.cisco.com/t5/network-security/pix-version-7-no-nat-control/m-p/495807#M534073 <P>I have read in the documentation that you can disable nat (no nat-control), and still specify NAT for networks, but I have not seen any examples, so do not know if this will actually work. I have a PIX that has 4 active interfaces (3 internal, one Internet). Currently we use nat (0) "acl" for all the internal access, and nat (1)/global for the Internet. If I use the "no nat-control", will it keep the nat(1)/global configuration parameters?</P> Fri, 21 Feb 2020 08:20:27 GMT https://community.cisco.com/t5/network-security/pix-version-7-no-nat-control/m-p/495807#M534073 rsmith 2020-02-21T08:20:27Z Re: PIX Version 7, no nat-control https://community.cisco.com/t5/network-security/pix-version-7-no-nat-control/m-p/495808#M534075 <HTML><HEAD></HEAD><BODY><P>Thanks, but never mind. I answered my own question through upgrade process. </P><P>Entering "no nat-control" will let access through with no translation, but you can still enter a nat/global pair and it WILL translate and function correctly.</P><P></P></BODY></HTML> Wed, 17 Aug 2005 18:41:45 GMT https://community.cisco.com/t5/network-security/pix-version-7-no-nat-control/m-p/495808#M534075 rsmith 2005-08-17T18:41:45Z