topic Debug command on PIX 7.0(1) in Network Security

Debug command on PIX 7.0(1)

benjamingarcia — Fri, 21 Feb 2020 08:19:33 GMT

What is the replacement of "debug packet" command on version 7.0?

Thanks in advance.

Re: Debug command on PIX 7.0(1)

rsmith — Fri, 12 Aug 2005 16:03:52 GMT

The only option I found that gives similar capabilities is the "capture" command,

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_command_reference_chapter09186a008045277a.html

which has been around since version 6.2.

Re: Debug command on PIX 7.0(1)

benjamingarcia — Sun, 14 Aug 2005 22:45:37 GMT

I have an open case with TAC and even the engineer couldn't tell me what command replaces the debug packet.

I have used the capture command and you can use your web browser to see the captured packets. It's cool but you can't see it in real time. I think there are times that you want to see the debug in realtime when conducting troubleshooting and the capture command is not good on this.

I hope Cisco will return the old command on their update.

Cheers