topic Re: HTTP Error 403 - Forbidden in Network Security

HTTP Error 403 - Forbidden

johng231 — Mon, 11 Mar 2019 21:05:05 GMT

Hello

We're getting this error message randomly when surfing the Internet. We have websense running on our network to perform web content filtering and are using the ASA for the http/https redirects. We've contacted websense and they said this error message is coming from the ASA, not their product.

Does anyone have any ideas?

Has anyone else seen this?

ASA-5550

version 7.2.4

Re: HTTP Error 403 - Forbidden

Anu M Chacko — Thu, 28 Jul 2011 16:30:05 GMT

Hi John,

Could you post the output of "sh run filter" here?

You could truncate long URLs:

filter url http 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow proxy-block cgi-truncate

Here's a link:

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/filter.html#wp1042572

Hope this helps!

Regards,

Anu

P.S. Please mark this question as answered if it has been resolved. Do rate helpful posts.

Re: HTTP Error 403 - Forbidden

johng231 — Thu, 28 Jul 2011 18:42:04 GMT

Here are the url filter statements we are have on our asa firewall.

Is it recomended to use both longurl-truncate and cgi-truncate or is just using the cgi enough in this situation?

Websense was recommending that we use the url-mempool option instead of using the truncate statements. Let me know your thoughts on what is the best way here.

filter url except 0.0.0.0 0.0.0.0 205.140.x.x 255.255.255.255

filter https except 0.0.0.0 0.0.0.0 205.140.x.x 255.255.255.255

filter url except 172.27.x.x 255.255.255.255 0.0.0.0 0.0.0.0

filter url except 0.0.0.0 0.0.0.0 209.135.x.x 255.255.255.255

filter https 443 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow

filter url http 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow

Re: HTTP Error 403 - Forbidden

Anu M Chacko — Sat, 30 Jul 2011 11:30:33 GMT

Hi John,

I suggest you try the CGI option first and see if it makes a difference. Read up on both the options in the link that I've provided above.

Regards,

Anu

P.S. Please mark this question as resolved if it has been answered. Do rate helpful posts.

Just want to add to this,We

rdasuki — Thu, 31 Jul 2014 18:06:36 GMT

Just want to add to this,

We have been fighting this 403 errors for weeks and were in touch with websense. We have followed their document 2208 for websense/asa configuration and changed protocol from tcp to udp. This has somewhat improved the situation however we were still seeing 403 error and blank page on Microsoft main page.

Looking closely to their setup, I noticed that they left out longurl-truncate statement and I also noticed Microsoft redirect their main page to a ridiculously long url. I added back longurl-truncate and cgi-truncate as well. This fixed Microsoft's blank issue immediately and I am also noticing a faster web page load.

Hope this help if anyone experiencing similar problem.

Rieman