configuring NAT when there is no nat-control

sidcracker — Mon, 11 Mar 2019 21:04:13 GMT

Hello

Quick question on no nat-control. If we enable no nat-control on the firewall, is it possible to enable NAT on case by case basis if required?

Thanks

configuring NAT when there is no nat-control

varrao — Wed, 27 Jul 2011 06:29:32 GMT

Hi Sid,

If you have no-nat control enabled on the firewall, then you don't need a translation for it, but yes if you want tos pecify any translation for some traffic, you can. You need not specify it for others. Just make sure you have the access-lists to allow the traffic.

Hope this helps

Thanks,

Varun

topic configuring NAT when there is no nat-control in Network Security

configuring NAT when there is no nat-control

configuring NAT when there is no nat-control