topic PIX to ASA Migration Tool??? in Network Security

PIX to ASA Migration Tool???

Zubair.Sayed_2 — Mon, 11 Mar 2019 21:03:07 GMT

Hi All,

Where can I obtain this tool please, I have checked the Cisco website but dont seem to find it.

I do have partner access and am able to download software.

Regards

Zubair

PIX to ASA Migration Tool???

Adam Makovecz — Mon, 25 Jul 2011 08:06:44 GMT

Hi,

what is your PIX and ASA version? if you do upgrades, it does automatically. Otherwise you just can copy and paste the configuration.

Be carefull about the major steps, like 6.3->7.0 or 8.2->8.3

Re: PIX to ASA Migration Tool???

Zubair.Sayed_2 — Mon, 25 Jul 2011 08:11:12 GMT

Hi Adam,

Thanks for reply.

See below version:

Cisco PIX Security Appliance Software Version 8.0(4)

Device Manager Version 6.1(5)

The ASA's are due to arrive shortly so I dont have the versions yet.

Thanks

Re: PIX to ASA Migration Tool???

Adam Makovecz — Mon, 25 Jul 2011 08:17:42 GMT

In this case, you jsut have to take care of the real interface names, and upgrade the ASA for the same version or 8.0.5. If the interface names are diffrent or you ordered ASA5505, edit the config manually with a text editor, then you can copy and paste the configuration.

Re: PIX to ASA Migration Tool???

Zubair.Sayed_2 — Mon, 25 Jul 2011 08:23:31 GMT

So basically what you saying is I take the "text config" from the PIX and paste this "text config" into the ASA.

But they have to be on the same software versions, is that what you saying??

We would like the ASA to have the latest version??

Re: PIX to ASA Migration Tool???

Adam Makovecz — Mon, 25 Jul 2011 08:28:42 GMT

yes! between each versions there are some very small changes, like subcommands renamed-replaced,etc.

During the migration use the same version and then you can upgrade on the ASA whatever version you want.

Here are the release notes if you want to check the versions:

http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html

Re: PIX to ASA Migration Tool???

Zubair.Sayed_2 — Mon, 25 Jul 2011 08:47:19 GMT

Thanks Adam. Marked your reply as correct.

Regards

PIX to ASA Migration Tool???

tomsutherland — Mon, 25 Jul 2011 15:21:02 GMT

the actual pix to asa tool is quite hard to find, but it is still there:

Follow the selections SECURITY > FIREWALL > FIREWALL APPLIANCES > CISCO PIX FIREWALL SOFTWARE > CISCO PIX FIREWALL VERSION 4.4

Expand the folder for '1', click on '1.0'. Pix to ASA converter is listed here.

PIX to ASA Migration Tool???

Zubair.Sayed_2 — Mon, 01 Aug 2011 07:33:45 GMT

Thanks Tom. Found the tool....