topic Pb Bug Remote VPN in Network Security

Pb Bug Remote VPN

lbellicaud — Mon, 11 Mar 2019 21:01:09 GMT

Hello,

I have a problem connecting a remote VPN ASA5510 Version 8.3 and Dell latitude laptop with a 4300 card SFR 3G. Note that the phones have a cisco VPN client version 5.0.07.0440 (Laptop with Windows 7 64bit) and 5.0.07.0410 (Laptop with Windows XP 32-bit or 7).

The Laptop connect properly and they can work but as soon as the 3G signal is weaker, we have disconnections.

Symptom: after several disconnects (while the card is connected SFR 3G), we have a message from the VPN client, the client does not respond.

In the Device Manager, Network Adapters in the line "Cisco Systems VPN adapter" is a red check mark.

There must be enabled for this device to reconnect without restarting the laptop computer.

If anyone has a solution, I'm interested,

thanks

Pb Bug Remote VPN

Parminder Sian — Mon, 25 Jul 2011 06:12:11 GMT

Hi,

Support for Windows 7 on x64 (64-bit). This release, however, does not support WWAN devices (also called wireless data cards) on Windows 7 x86 (32-bit) and x64. For support of WWAN devices on Windows 7, please use the Cisco AnyConnect Secure Mobility client.

Thgis info is from following doc:-

http://www.cisco.com/en/US/partner/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp101224

Hope this helps.

Sian

Pb Bug Remote VPN

lbellicaud — Fri, 29 Jul 2011 13:10:50 GMT

Hi Sian,

thank you for your helps, you one can use against the client AnyConnect to the remote Vpn Ipsec?

In terms of licensing what happens?

laurent.

Pb Bug Remote VPN

praprama — Wed, 10 Aug 2011 21:23:44 GMT

Hi Laurent,

If you are asking if anyconnect can be used for IPSec, answer is no. Anyconnect client version 3 and above though is capable of IKEv2 VPN tunnels.

Regards,

Prapanch