topic Re: Exchange server inside Pix with Static command in Network Security https://community.cisco.com/t5/network-security/exchange-server-inside-pix-with-static-command/m-p/406445#M536256 <HTML><HEAD></HEAD><BODY><P>All looks good to me. I managed to break into your system ok. OOPS.</P><P></P><P>I does look like you have a timeout issue somewhere but nothing wrong with the PAT.</P></BODY></HTML> Mon, 27 Jun 2005 11:07:23 GMT csturmey 2005-06-27T11:07:23Z Exchange server inside Pix with Static command https://community.cisco.com/t5/network-security/exchange-server-inside-pix-with-static-command/m-p/406444#M536254 <P>I have temporarily given access to my inside Exchange Server with 3 static commands.</P><P>static (inside,outside) tcp 216.xxx.xxx.xxx smtp 10.10.10.9 smtp netmask 255.255.</P><P>255.255 0 0</P><P>static (inside,outside) tcp 216.x.x.x 443 </P><P>10.10.10.9 443 netmask 255.255.</P><P>255.255 0 0</P><P></P><P>static (inside,outside) tcp 216.x.x.x 80 </P><P>10.10.10.9 80 netmask 255.255.</P><P>255.255 0 0</P><P></P><P>It works fine for a while, sometimes an hour. But then stops. I can clear it with a "clear xlate". But thats not a solution. What am I doing wrong. Thanks</P> Fri, 21 Feb 2020 08:14:00 GMT https://community.cisco.com/t5/network-security/exchange-server-inside-pix-with-static-command/m-p/406444#M536254 mikemayou 2020-02-21T08:14:00Z Re: Exchange server inside Pix with Static command https://community.cisco.com/t5/network-security/exchange-server-inside-pix-with-static-command/m-p/406445#M536256 <HTML><HEAD></HEAD><BODY><P>All looks good to me. I managed to break into your system ok. OOPS.</P><P></P><P>I does look like you have a timeout issue somewhere but nothing wrong with the PAT.</P></BODY></HTML> Mon, 27 Jun 2005 11:07:23 GMT https://community.cisco.com/t5/network-security/exchange-server-inside-pix-with-static-command/m-p/406445#M536256 csturmey 2005-06-27T11:07:23Z