change external ip remotely

network770 — Mon, 11 Mar 2019 20:54:56 GMT

I need to change an asa external ip address remotely, usually when we do this type of thing with the routers we reload in 5min and if the new ip does not kick in for some reason and we loose connection, reload in 5min takes care of it.

Question is : if I reload in 5min then go to the interface and put in a new IP address and it does not work, after the firewall reloads does it reatain the OLD ip or the NEW ip. When you put in a command on the asa does it automatically save it such that it is saved after a reboot or not?

Re: change external ip remotely

mvsheik123 — Tue, 05 Jul 2011 17:47:25 GMT

Hi,

The ASA doen't do 'auto save'. You need to issue 'write mem' or when you issue 'reload' command, it will prompt you to save (yes/no) for the changes. Hope I understood your question correct ;-).

hth

** Sorry..did a typo in the initial post**

topic Re: change external ip remotely in Network Security

change external ip remotely

Re: change external ip remotely