topic Cisco 1941 IOS IPS error in Network Security

Cisco 1941 IOS IPS error

cco4mike1 — Sun, 10 Mar 2019 12:58:54 GMT

Hi,

I'd currently experimenting with IOS based IPS and want to see if it's relevant for my customer. Im configuring it through Cisco Configuration Professional version 2.6 and using downloaded signature sigv5-SDM-S724.zip and the public key loaded as per all documentation suggests. As I finalise with interfaces and all setup parameters in CCP, as I deliver the config to the router I notice the error-

%IPS-3-SIG_UPDATE_REQUIRED: IOS IPS requires a signature update package to be loaded

Any help would be much appreciated.

Cisco 1941 IOS IPS error

Luis Silva Benavides — Fri, 05 Jul 2013 23:19:25 GMT

Hi,

Could you please load the Signature again but via CLI either using FTP or TFTP

copy ftp:/// idconf

Note: Please remember to use the `idconf' parameter at the end of the copy command.

Do you see any other issue?

HTH

Luis Silva

"If you need PDI (Planning, Design, Implement) assistance feel free to reach"

http://www.cisco.com/web/partners/tools/pdihd.html

Cisco 1941 IOS IPS error

Luis Silva Benavides — Sat, 06 Jul 2013 00:00:26 GMT

You can find the lastest signature here:

http://tools.cisco.com/squish/a7A00

HTH

Luis Silva

"If you need PDI (Planning, Design, Implement) assistance feel free to reach"

http://www.cisco.com/web/partners/tools/pdihd.html