topic IPS testing in Network Security https://community.cisco.com/t5/network-security/ips-testing/m-p/2207280#M53701 <HTML><HEAD></HEAD><BODY><P>Hello Jess,</P><P></P><P>Well, We usually enable Signature ID 2000 Sub-ID 0</P><P></P><P>Which is set for ICMP, so you can send ICMP across the IPS and then correlate if the configured action was triggered,</P><P></P><P>Regards,</P><P></P><P>Remember to rate all of the helpful posts. <BR /> <BR />For this community that's as important as a thanks.</P></BODY></HTML> Fri, 14 Jun 2013 00:37:03 GMT Julio Carvajal 2013-06-14T00:37:03Z IPS testing https://community.cisco.com/t5/network-security/ips-testing/m-p/2207279#M53699 <P>Hi, is there any good practical advice on testing an IPS?</P> Sun, 10 Mar 2019 12:58:46 GMT https://community.cisco.com/t5/network-security/ips-testing/m-p/2207279#M53699 jesrobbie 2019-03-10T12:58:46Z IPS testing https://community.cisco.com/t5/network-security/ips-testing/m-p/2207280#M53701 <HTML><HEAD></HEAD><BODY><P>Hello Jess,</P><P></P><P>Well, We usually enable Signature ID 2000 Sub-ID 0</P><P></P><P>Which is set for ICMP, so you can send ICMP across the IPS and then correlate if the configured action was triggered,</P><P></P><P>Regards,</P><P></P><P>Remember to rate all of the helpful posts. <BR /> <BR />For this community that's as important as a thanks.</P></BODY></HTML> Fri, 14 Jun 2013 00:37:03 GMT https://community.cisco.com/t5/network-security/ips-testing/m-p/2207280#M53701 Julio Carvajal 2013-06-14T00:37:03Z